inSSIDer Update Available!

Download the latest version of inSSIDer for the best, most up-to-date software available.

Some changes you’ll notice in Version 2.1:

  • – Improved Filters
  • – Improved Interface
  • – Improved Network Colors

Find what you’re looking for quickly – filter by SSID, Vendor, Channel, Band, Network Type, or Security.

16 comments for “inSSIDer Update Available!

  1. Msodergren
    February 1, 2012 at 6:23 pm

    How can I print the page?

    • February 2, 2012 at 5:48 pm

      the easiest way is to go to your browser menu bar, select FILE, and find the PRINT option.

  2. Mykal2000
    February 2, 2012 at 10:36 pm

    Downloaded file is only 2.0 version. Somebody mis-post this? Went to, same result. 

    • Anonymous
      February 14, 2012 at 3:55 pm

      I think this issue is resolved in the latest release.  Thank you for catching that!

  3. ToMykal2000
    February 3, 2012 at 12:09 am

    Remove old version. Install current version. Ignore messages on version 2.0. Check at Help -> About in SSIDer and you’ll find it is version 2.1.

    • February 3, 2012 at 8:47 pm

      We have a few tiny things to correct – including the oversight of the icon which didn’t get a version # increase to 2.1.  Will be releasing the updated, updated inSSIDer with those tiny tweaks fixed on Tuesday February 7th.  Apologies for the confusion.

  4. masterzero
    February 6, 2012 at 7:18 am

    in my SSIDer i have a mistake, it says. ” error atempting to use interface. make sure you have selected a wifi adapter, no an ethernet adapter”. i´m using the program in a virtual machine, for mac. can you help me?

    • February 6, 2012 at 11:23 pm

      Hi masterzero,  you’ll need an additional Wi-Fi adapter connected to your mac so you can pull wireless data in your virtual machine.

  5. Anonymous
    February 7, 2012 at 4:13 pm

    Installer still says 2.0.

  6. Nomorejunkemail
    February 8, 2012 at 2:20 pm

    the display just above says NEWTORK, BUT the update fixes that!  Thanks.

  7. r123
    February 13, 2012 at 2:25 pm

    lacks ccmp/tkip distinguishability. why?

    • Anonymous
      February 14, 2012 at 3:51 pm

      inSSIDer does distinguish between the two however it labels them as WPA-Personal (TKIP, WPA2-Personal (CCMP) and WPA2-Enterprise

      • r123
        February 15, 2012 at 1:45 pm

        What about WPA-CCMP and RSNA-TKIP labeled in v2.0?
        WPA can be used with CCMP=AES(optional).
        RSNA=WPA2 can be used with TKIP.

  8. marcelo
    February 13, 2012 at 6:42 pm

    my max rate is 300 but this program shows 54!

    • Anonymous
      February 14, 2012 at 3:54 pm

      Thank you for your feedback. We’ll look into this. Please remember that for the full benefits of 300mbps you will need a compatible 802.11n Wi-Fi card as well.

Comments are closed.